Install Garage Door Opener can be a complicated task, especially that it is a project that should be handled by those with proper training. However, newer models now claim that they can be done as a Do-It-Yourself project. Hence, we made this post in order to act as a supplementary material for the installation of your garage door openers.
Prior To Install Garage Door Opener
Make sure that all the parts are accounted for in your garage door pack. All of the nuts and fittings should be included there so perhaps you should bear in mind first which fittings you would be needing for your door and try inspecting if they are present in the packaging. If ever they are not present or if the ones provided are not compatible to the material of your door, then you can purchase these extra fittings from a local store.
The thing with garage door openers is that it is a DIY project that may or may not be completely compatible with your door material. Hence, a wooden door might not be compatible with the fittings provided by the device. Discerning how many fittings and nuts you would be needing and counter-checking it with your item is a must in order to give you space to buy the needed fittings, hence saving more time.
During Install Garage Door Opener
Read the instructions carefully. We do understand that not all are acquainted to mechanical work so if the instructions are too vague for you, then consider calling a local professional staff or a technician to install the whole thing. If you want to install it by yourself, then study the whole instruction manual first and look for installation videos in YouTube. This way you would have an initial picture in your mind on what to do. Also, search for forum sites and discussion threads regarding your specific garage door opener in order to discern the case-to-case issues which you might face.
The mounting straps however that most door openers aren’t that strong. Hence, it would be better to install it with your own angle iron. Purchase an angle iron and cut it with a hacksaw. Make sure that the ones you are buying are slotted to begin with. Moreover, make sure to replace all components. Do not be tempted on keeping some intact just because you think it is still working fine.
Those photo-electric eyes might still be working however, it might present some compatibility issues in the long run. Replace everything including the wirings. Newer garage door openers are much more sensitive hence not replacing all components may not only void the warranty, it can even cause major failures in the future.
After Install Garage Door Opener
After setting the whole fixture up, makes sure that everything is balanced. Make sure that the door is not tilting towards one side and that it closes on all sides at the same time. Also, adjust the opening and closing force. Most garage door openers nowadays come with this feature hence it wouldn’t be a hard task to adjust the starting force of the fixture based on your door’s mass. This can prolong the life of your device and can aid in a smoother operation that is free of noise.
As a conclusion, installing a best garage door opener can be a case-to-case basis depending on the model, type and brand that you would be choosing. However, studying beforehand can actually eliminate disappointments in the end and can even hasten the process of the installation. Good luck on your installation and do not hesitate to comment below for any issues that you would encounter.